[LANGUAGE]
1) English
2) Select language ...
3) Not available yet
4) 100

[AVAILABLE]
1) English (UK)
2) English (US)
3) русский
4) 中文 
5) Español
6) Français
7) 日本語
8) 한국어

[INSERT IDENTIFIER]
1) ___

[MAIN INTERFACE]
1) Enter name
2) Accept
3) Cancel
4) Close
5) Range ___
6) Clear
7) All
8) Pocket
9) Broadway
10) Suited
11) Clear
12) FlopzillaPro v___: Trial version
13) FlopzillaPro v___: Registered version
14) Trial expired. 
15) Please activate FlopzillaPro.
16) Could not download available codes from server.
17) Code does not exist. Please check if you spelled it correctly.
18) File not found. Please contact support.
19) Failed to read instruction.
20) Failed to create file.
21) Successfully downloaded file!
22) Ranges have been loaded!
23) Select language
24) Inv

[PREDEF INTERFACE]
1) Group ___
2) Imported ranges
3) Add range
4) Overwrite
5) Rename
6) Delete
7) Add category
8) Suit selection
9) Drag+drop here to use multiple groups
10) CTRL
11) SHIFT
12) CTRL+SHIFT
13) Press CTRL while double-clicking a range to ADD it to the current range
14) (instead of replacing it)
15) Press SHIFT while double-clicking a range 
16) to remove it from the current range.
17) Press CTRL+SHIFT while double-clicking a range 
18) to remove the current range from this range.
19) Combos
20) % (abs)
21) % (rel)
22) There was an issue reading /config/newdefs.txt (preflop ranges).
23) Number of missing items: ___. To restore to a backup,
24) go to "___".
25) All items appear to be present.
26) There was an issue importing the external file.
27) Number of missing items: ___
28) If possible, you may want to try another file.

[RANGE EDITOR]
1) Starting range editor
2) ___ combos in preflop range
3) Weight
4) Suit selection
5) APPLY SELECTION
6) Apply groups
7) Group ___
8) Suit selection
9) The "No limit" ranking was created by using GTO+, which is our GTO analysis software.
10) It's based on the aggregate EV performance for "all hands" vs "all hands", measured
11) over all 22100 unique flops in a 100bb deep NL game.
12) Starting hand
13) Colour (RGB format):
14) Custom name:
15) Your custom settings are stored in /config/settings.txt.
16) Edit this file if you want more than 12 groups.
17) Help
18) Looking at preflop range. Press CTRL to view postflop range.

[BOARD EDITOR]
1) Random
2) Random(T)
3) Random(R)
4) Lock flop
5) Lock flop+turn
6) Flop
7) Turn
8) River
9) Board
10) Flop must be
11) Td9d6h in trial.

[DEAD EDITOR]
1) Random
2) Dead cards
3) Go to multiway mode for
4) detailed equity output:
5) Enable group mode:
6) Data for hand:
7) Data for range:
8) Equity:
9) Win:
10) Tie:
11) Please enter
12) at least
13) two ranges
14) Enter two
15) holecards to
16) see their equity
17) vs the range
18) -
19) A new update
20) is available:
21) Version ___
22) Selected range
23) is not connected
24) -
25) -
26) A new beta
27) is available:
28) Selected range
29) is empty
30) Selected range
31) is dead

[MAGNIFY WINDOW]
1) Set custom magnification
2) Use your MouseWheel to scale Flopzilla's window up/down.
3) To scale up/down without this window, use Shift+MouseWheel.
4) Current magnification:

[IMPORT WINDOW]
1) Import predefs
2) Store your ___ file to the same directory as Flopzilla.exe
3) newdefs3.txt
4) newdefs2.txt
5) Replace current ranges
6) Import into sub-category
7) IMPORT RANGES
8) SUCCESSFULLY IMPORTED RANGES!
9) FAILED TO IMPORT RANGES
10) Imported ranges
11) pio/monker/other
12) .
13) Which type of file(s) would you like to import?
14) Select Your Source Directory
15) Select ___ file
16) newdefs2.txt (Flopzilla v1/CREV)
17) newdefs3.txt (FlopzillaPro/GTO+)
18) This file can be found in the same directory as the .exe file.
19) Flopzilla v1:
20) C:/Program Files (x86)/Flopzilla/Flopzilla
21) CREV:
22) C:/Program Files/CardRunnersEV/CardRunnersEV3
23) This file can be found in the /config subdirectory.
24) FlopzillaPro:
25) C:/Program Files (x86)/FlopzillaPro/FlopzillaPro/config
26) GTO+:
27) C:/Program Files/GTO/config
28) Click on "IMPORT RANGES" and select the directory with the
29) file(s) in it.
30) Not in range
31) Select RESTORE file
32) Restore from backup
33) Made a mistake when importing?
34) Click here to restore your ranges.
35) Ranges restored to previous state!

[REGISTER WINDOW]
1) Registration info
2) Registered
3) Trial version
4) This copy of Flopzilla has been registered to
5) Flopzilla is currently running in trial mode.
6) Hardware ID
7) Purchase Flopzilla
8) Request new key
9) Activate key!
10) License data
11) Enter key
12) E-mail address:
13) Key:
14) Key accepted.
15) Please restart this software.
16) Key was not accepted.
17) Please try again or contact support.
18) Successfully downloaded activation data.
19) Please restart this software.
20) Incorrect activation code.
21) Please try again.
22) Successfully removed registration.
23) Please restart this software.
24) Checking license
25) Connecting to server ...
26) Could not connect to server.
27) Please restart or try updating this software to the latest version.
28) Key not accepted.
29) This issue may be resolved by upgrading to the latest version.
30) Or possibly by requesting a new key (for this go to "register" in the menu).
31) License no longer valid.
32) This slot is now used by another computer.
33) The license can be moved back by requesting a new key (go to "register" in the menu).
34) Error code ___
35) This is a key for Flopzilla v1. 
36) Press "Request new key" to request a key for FlopzillaPro.
37) Key nr: ___

[OPTIONS WINDOW]
1) Edit startup settings
2) Night mode: Dim background by
3) Use large vertical window at startup
4) Use larger area for stat names (0-100)
5) Startup window configuration
6) Appearance
7) Use "Group" mode at startup
8) Use "Multiway" mode at startup
9) Filter default settings
10) Store current filter settings as default
11) Store filter settings
12) Store current filter settings as default?
13) Only store currently visible filters
14) Only store the preflop filter settings
15) Store ALL postflop filter settings
16) STORE ALL FILTER SETTINGS
17) Settings stored
18) Successfully stored filter settings!
19) Draw hints
20) Optional statistics
21) Also include 1 card backdoor flushdraws
22) Also include "___"
23) Dark mode intensity:

[QUICKBUTTONS]
1) Edit startup settings
2) Switch to single player mode
3) Switch to multi-player mode
4) Switch to group mode
5) Switch to classic mode (single filter, no groups)
6) Stop enlarging window downwards. Window will be smaller, however, extra
7) options such as preflop groups and suit selection will be hidden.
8) Enlarge window downwards. This will give you access to
9) extra options, such as preflop groups and suit selection.
10) It will also create more space for customized conditions.
11) Set magnification (default is 100%)
12) .

[MULTIWAY SECTION]
1) Click on the + to add a second range
2) -
3) -
4) Click to ignore in the multiway calculations
5) Click to include in the multiway calculations
6) Left-click to delete this range.
7) Use Ctrl+click to remove without confirmation.
8) CLICK AGAIN TO CONFIRM
9) Select this option to consider this range as being dead (in other words, having folded).
10) This feature can be used to include the bunching effect in equity calculations.
11) Click to no longer consider this range as being dead.

[PREFLOP NAMES]
1) >=quads
2) royal flush
3) straight flush
4) quads
5) - with pp
6) - on trip board
7) full house
8) pp with set
9) unpaired hand
10) pp on trip board
11) flush
12) nut flush
13) 2nd nut flush
14) 3rd nut flush
15) 4th nut flush
16) 5th nut flush
17) 6th nut flush
18) 7th nut flush
19) 8th nut flush
20) 9th nut flush
21) straight
22) rainbow board
23) 2flush board
24) monotone board
25) 3 of a kind
26) set
27) trips
28) rainbow
29) 2flush
30) monotone
31) quads with pp
32) flushdraw (2 crd)
33) flushdraw (1 crd)
34) no flushdraw
35) two pair
36) top two
37) top+bottom
38) bottom two
39) overpair
40) unpaired
41) + OESD
42) + gutshot
43) + no str.dr.
44) paired
45) trips
46) unpaired board
47) paired board
48) trip board
49) rainbow board
50) 2flush board
51) monotone board
52) + flushdraw
53) + no flushdraw
54) top pair
55) pp below tp
56) middle pair
57) pp below mp
58) third pair
59) pp below 3rd
60) ace high
61) + OESD (2crd)
62) + gutshot (2crd)
63) + OESD (1crd)
64) + gutshot (1crd)
65) no made hand
66) trip
67) flushdr. (2 crd)
68) + straight
69) + top pair
70) + middle pair
71) + third pair
72) + ace high
73) + no made hand
74) OESD (2crd)
75) OESD (1crd)
76) gutshot (2crd)
77) gutshot (1crd)
78) overcards
79) all other
80) gutshot (2 card)
81) gutshot (1 card)
82) flushdr. (1 crd)
83) nut
84) 2nd nut
85) 3rd nut
86) 4th nut
87) 5th nut
88) 6th nut
89) <=7th
90) other pair
91) + pocket
92) + no pp
93) highcard
94) other pp
95) other pair
96) + regular
97) + dbl. belly bust.
98) + 2 overcards
99) + 1 overcard
100) + top oesd
101) top/mid/btm pair
102) pocket pair
103) pp below
104) + nut flushdr.
105) + 2nd nut
106) + <=3rd nut
107) + mid oesd
108) + bottom oesd
109) + top gutshot
110) + mid gutshot
111) + bottom gutsh
112) custom

[MATRIX NAMES]
1) made hand
2) draw
3) board
4) rainbow
5) 2flush
6) monotone
7) nut
8) 2nd nut
9) 3rd nut
10) 4th nut
11) 5th nut
12) 6th nut
13) 7th nut
14) 8th nut
15) 9th nut
16) 10th nut
17) flush data
18) mono,fd
19) mono,no.fd
20) board+draws
21) 2flush,fd
22) 2flush,no.fd
23) <=7th
24) mono,nut fd
25) mono,2nd
26) mono,other

[GROUP OUTPUT]
1) Group output
2) Please enter a range
3) Right-click to fix
4) Range has hit  in ___ matchups
5) Range has hit ___ of the time
6) Total number of matchups: ___
7) Only display grouped hands
8) Please assign groups
9) Press TAB for detailed matchups
10) Press TAB for percentage mode
11) Press CTRL+TAB for detailed matchups

[MESSAGE OUTPUT]
1) Press TAB for percentage mode
2) Press TAB for combo mode
3) Combos that pass the filters: ___
4) The filters are 
5) ON
6) OFF
7) Total number of combos: ___
8) Press TAB for combo mode
9) Press TAB for percentage mode
10) combos out of
11) Right-click to fix this popup. This will allow you to:
12) 1) Manually set filters for individual starting hands
13) 2) Mouse over other stats to see how they fall in this range
14) Select a
15) preflop
16) range
17) Double-click a filter to apply it to the entire range.
18) Left-click a filter to select it and edit individual hands.
19) Hold CTRL pressed to view the filter settings.
20) Right-click to fix the overlap.
21) Hold CTRL pressed for the inverted overlap.
22) Right-click to release the overlap.
23) The edits will 
24) be stored in
25) "___".
26) Apply current selection to all
27) Customize statistics
28) Flop breakdown tool
29) Reset all filters
30) (out of ___)
31) Combos: ___
32) ___ combos
33) pass through the filters (___).
34) out of
35) Editing overlap
36) Editing overlap
37) between ___
38) and ___.
39) "___"
40) out of
41) /
42) Invert range (filters must be ON)
43) ___ out of 
44) ___ combos 
45) pass through the filters (___).

[POSTFLOP NAMES]
1) quads
2) AA
3) KK
4) QQ
5) JJ
6) TT
7) 66-99
8) 22-55
9) ace high
10) no made hand
11) overcards
12) quads
13) full house
14) 3 of a kind
15) overpair
16) top pair
17) middle pair
18) pp < top card
19) pp < board
20) ace high
21) no made hand
22) flushdraw
23) OESD
24) gutshot
25) overcards
26) 2 crd bckdr fd
27) 1 crd bdfd high
28) 1 crd bdfd low
29) ---
30) straight
31) set
32) two pair
33) pp < 2nd card
34) bottom pair
35) >= str. flush
36) flush
37) - nut flushdr.
38) - 2nd nut
39) - 3rd nut
40) - 4th nut
41) - weak
42) no flushdraw
43) A high
44) K high
45) Q high
46) J high
47) T high
48) nothing
49) - set
50) - overpair
51) - top pair
52) - pp below tp
53) - pp < trips
54) - middle pair
55) - weak pair
56) full house (top)
57) full house (bot)
58) pp below top
59) >= quads
60) 3rd pair
61) weak pair
62) oesd (2 card)
63) oesd (1 card)
64) gutshot (2 crd)
65) gutshot (1 crd)
66) royal flush
67) straight flush
68) - nut
69) - 2nd nut
70) - 3rd nut
71) - 4th nut
72) - weak
73) nothing
74) - flopped
75) - turned
76) - trips
77) - overpair
78) - pp < trips
79) - 2nd pair
80) - pp < 2nd
81) - unpaired
82) good two pair
83) bad two pair
84) one pair
85) - strong
86) - weak
87) flushdr.+overc.
88) flushdr.+oesd
89) flushdr.+gutsh.
90) oesd+overc.
91) gutshot+overc.
92) flushdraw+pair
93) oesd+pair
94) gutshot+pair

[FLOP BREAKDOWN]
1) Flop breakdown
2) Unpaired flop
3) Paired flop (top)
4) Paired flop (bottom)
5) Trip flop
6) Rainbow
7) 2Flush
8) Monotone
9) no gaps
10) 1 gap
11) 2 gaps
12) 3 gaps
13) >3 gaps
14) Straight structure
15) Flop values
16) ___ flops
17) (___ flops in total)
18) Draw a different set of random flops
19) ___ flops in total. See below for a random sample.
20) ___ flops in current item. See below for a random sample.
21) A flop must pass all 4 fields to be accepted.
22) Display hints (only for first column)
23) Flop values:
24) In the first row you can select a domain of values for the top card.
25) In the second row a domain of values for the middle card.
26) And in the bottom row a domain of values for the bottom card.
27) ___ gaps between top card and middle card.
28) ___ gaps between middle card and bottom card.
29) Predef flops
30) ___ flops in current selection. See below for a random sample.
31) Apply current flop subset
32) Select all flops
33) Flop subset used! Click to remove.
34) Flop subset used! Right-click to remove.
35) ___ flops in total
36) ___ flops in current item
37) ___ flops in current selection
38) See below for a random sample.
39) 

[CUSTOMIZE STATS]
1) Create combined statistics
2) AND
3) OR
4) NOT
5) SUITS
6) ...
7) Custom
8) Operators:
9) Made hands:
10) Draws:
11) Add extra field
12) Remove field
13) Move to buffer
14) ACCEPT: Add to list of customized stats
15) ___
16) ___
17) ___(3)
18) ___(4)
19) Buffer:
20) Buffer (FULL):
21) Suits
22) Combined stats
23) Available slots: ___
24) All slots used
25) Remove from buffer
26) NO MORE SLOTS AVAILABLE
27) Left-click = Select
28) Right-click = Rename
29) Ctrl + Right-click = Delete
30) Accept
31) Cancel

[CUSTOMIZE INSTRUCTIONS]
1) Instructions:
2) In order to combine stats,
3) drag+drop them into an 
4) operator. 
5) ___
6) When an operator is full
7) it will turn green. Once
8) this has happened it can
9) be dragged+dropped into
10) other operators, moved
11) to the temporary buffer
12) or stored to the
13) customized stats.

[CUSTOMIZE INSTRUCTIONS2]
1) This operator can be used to
2) specify specific suits. 
3) ___
4) Given the fact that they only
5) apply to one very specific
6) board, conditions that were 
7) created with this operator
8) will reset every time that
9) the program is restarted.
10) ___
11) It's also for this reason
12) that this operator can not
13) be used as a part of other
14) operators.

[OTHER OUTPUT]
1) Hotness
2) ___ items in table
3) ___ cards increase eq.
4) ___ cards decrease eq.
5) No hotness data available
6) Please enter a flop/turn,
7) as well as a range.
8) Equity matrix
9) Equity graph
10) ___ items in graph
11) Equity(%)
12) Win(%)
13) Tie(%)
14) Eq: ___
15) Win: ___
16) Tie: ___
17) Groups
18) Eq. graph
19) Eq. matrix
20) Hotness
21) Monte Carlo:
22) Running on a single processor
23) Paused
24) Running on ___ processors
25) ...

[FORBIDDEN PROCESS EDITOR]
1) Forbidden process detected
2) ___ detected.
3) Flopzilla will not respond to input until this process has been closed.

[COMMUNICATION]
1) Please restart the software in order to use the new port nr.

[MENU]
1) File
2) Commands
3) Settings
4) Help
5) GTO+
6) Register
7) New (Ctrl+N)
8) Open... (Ctrl+O)
9) Save (Ctrl+S)
10) Save As...
11) Undo (Ctrl+Z)
12) Redo (Ctrl+Y)
13) Exit
14) Toggle between percentage and combo mode (TAB)
15) Add/edit note (Alt+N)
16) Text output for current range (Ctrl+Alt+T)
17) Text output for current statistics (Ctrl+Alt+S)
18) Edit startup configuration
19) Reset magnification to 100%
20) Set magnification to 200%
21) Hint: Use Shift+Mousewheel to magnify the window
22) Enter code (Ctrl+Alt+D)
23) Import predef ranges from newdefs2.txt or newdefs3.txt
24) About Flopzilla...
25) Export to GTO+
26) Configuration (port number, etc)
27) Choose different language
28) Update language files
29) Check for language updates when starting program
30) Dark mode

[MENU2]
1) Download update?
2) An update for your language files was detected.
3) Would you like to download it?
4) Update language files?
5) Yes
6) No
7) Don't ask me again
8) Successfully updated language file!
9) Failed to update language file.
10) Download?
11) Edit group
12) Range output
13) OK
14) Cancel
15) Enter code
16) Enter your code:
17) Enter name
18) Program message
19) Data
20) Export to GTO+
21) Export range to GTO+
22) Export current range to Range 1 (OOP) in GTO+
23) Export current range to Range 2 (IP) in GTO+
24) Export both ranges to GTO+
25) Also export board
26) Enter note
27) Port settings
28) Select port nr (50000-60000)
29) GTO+ must be the same port.
30) Allow GTO+ to connect to FlopzillaPro.